RE: Static RP with bsr-border cmd

Hi,

It sounds like you probably just want to enable the multicast boundary command on s1/0, assuming you want to scope your domain to that interface. The BSR border command is going to scope BSR specific link-local PIM-ROUTERS (224.0.0.13) communication on whatever interface you enable it on.

-ryan

Hi All,

need some help with this config. Can the bsr-border command work with the
bsr-candidate config?

R8:
interface Serial1/0
* ip pim bsr-border*
 ip pim sparse-mode

interface FastEthernet0/0.89
 ip pim sparse-mode

ip pim rp-address 10.10.8.8

R9:
interface FastEthernet0/0.89
 ip pim sparse-mode

ip pim rp-address 10.10.8.8

Splinter

Blogs and organic groups at http://www.ccie.net
Received on Tue May 26 2009 - 11:17:59 ART