Re: Frame-Relay Per-VC CBWFQ

Hi Dale,

  I missed the mincir setting on the map-class and once that is been
set,after applying to the interface,it didn't give me the message. Thank you
very much.

 Now ,I have a question,if the mincir is not set,will not it take the
interface bandwidth for the calculation.Kindly let me know.Anyhow pasting
the required config below

!
interface Serial0/0
 ip address 155.1.0.4 255.255.255.0
 encapsulation frame-relay
 no fair-queue
 clock rate 2000000
 frame-relay class SHAPE
 frame-relay traffic-shaping
 frame-relay map ip 155.1.0.5 405 broadcast
!
map-class frame-relay SHAPE
 frame-relay mincir 64000
 service-policy output PER_VC_POLICY

Thanks

Regards
Anantha Subramanian Natarajan

On Sun, May 24, 2009 at 9:54 PM, Dale Shaw <dale.shaw_at_gmail.com> wrote:

> Hi Ananth,
>
> On Mon, May 25, 2009 at 12:31 PM, Anantha Subramanian Natarajan
> <anantha.natarajan_at_gravitant.com> wrote:
> >
> > While applying to the interface it gave me the below mesage
> > stating available only 0 kbps ..what is that mean ?.. Any help really
> > appreciated.
>
> > R4(config-if)#frame-relay class SHAPE
> > I/f Serial0/0 DLCI 405 class VOICE requested bandwidth 32 (kbps),
> available
> > only 0 (kbps)
>
> Please post your full config -- well, the F/R map-class and interface
> configs anyway.
>
> Did you set the 'mincir' value within the map-class?
>
> cheers,
> Dale

Blogs and organic groups at http://www.ccie.net
Received on Sun May 24 2009 - 22:05:18 ART