RE: OSPF neighbor on non-broadcast OSPF network type

I'd really have to see the configurations to believe that one : ) No
offense, but non-broadcast on both sides with no neighbor statement just
simply won't work as far as I know.
 

Regards,

Joe Astorino
CCIE #24347 (R&S)
Sr. Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com <http://www.ipexpert.com/>
  

  _____

From: Anantha Subramanian Natarajan [mailto:anantha.natarajan_at_gravitant.com]

Sent: Sunday, May 24, 2009 7:08 PM
To: Joe Astorino; Cisco certification
Subject: Re: OSPF neighbor on non-broadcast OSPF network type

Hi Joe,
 
  Both sides were non-broadcast and later me changed the topology to
broadcast on both sides to do some other scenario..I am trying to erase the
config and try to recreate the same topology to see whether it comes back .
 
Thanks
 
Regards
Anantha Subramanian Natarajan

On Sun, May 24, 2009 at 6:05 PM, Joe Astorino <jastorino_at_ipexpert.com>
wrote:

Generally you do need it, but without further information it is really
difficult for us to tell you exactly. We need to know the network type on
the other side as well.

Regards,

Joe Astorino
CCIE #24347 (R&S)
Sr. Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com <http://www.ipexpert.com/>

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Anantha Subramanian Natarajan
Sent: Sunday, May 24, 2009 2:25 PM
To: Cisco certification

Subject: OSPF neighbor on non-broadcast OSPF network type

Hi All,

  I ran OSPF on an non-broadcast OSPF network type between R1 and R2 and
saw the neighbor came up without configuring explicitly "neighbor " command
under the OSPF process.I was assuming the neighbor command is
required.Kindly let me know on this and also if missed some basic on it.

Thanks

Regards
Anantha Subramanian Natarajan

Blogs and organic groups at http://www.ccie.net <http://www.ccie.net/>
Received on Sun May 24 2009 - 19:11:59 ART