Re: OSPF neighbor on non-broadcast OSPF network type

Read this... it should clear things.!
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009470d.shtml
Thanking You

Yours Sincerely

Divin Mathew John
divinjohn_at_gmail.com
divin_at_dide3d.com
http://www.dide3d.com
+91 9945430983
+91 9846697191
+974 5008916
PGP PUBLIC KEY BLOCK @ http://www.dide3d.com/divin_Public_PGP_key.txt
Sent from Bangalore, KA, India

On Mon, May 25, 2009 at 3:41 AM, Divin Mathew John <divinjohn_at_gmail.com>wrote:

> I guess you shud diable inverse arp, Broadcast from the framerelay map and
> try!
> Thanking You
>
> Yours Sincerely
>
> Divin Mathew John
> divinjohn_at_gmail.com
> divin_at_dide3d.com
> http://www.dide3d.com
> +91 9945430983
> +91 9846697191
> +974 5008916
> PGP PUBLIC KEY BLOCK @ http://www.dide3d.com/divin_Public_PGP_key.txt
> Sent from Bangalore, KA, India
>
> On Mon, May 25, 2009 at 3:42 AM, Santiago Enciso <
> senciso_at_infocenter.com.py> wrote:
>
>> Also take a look at the frame relay mappings show frame-relay map
>> If you have en entry "0.0.0.0" this could be the problem.
>>
>> Santiago E
>>
>>
>> -----Mensaje original-----
>> De: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] En nombre de
>> Anantha Subramanian Natarajan
>> Enviado el: Domingo, 24 de Mayo de 2009 15:09
>> Para: hanan; Cisco certification
>> Asunto: Re: OSPF neighbor on non-broadcast OSPF network type
>>
>> Hi Hanan,
>>
>> Thanks and will try that.
>>
>> Regards
>> Anantha Subramanian Natarajan
>>
>> On Sun, May 24, 2009 at 1:47 PM, hanan <nouran_at_skynet.be> wrote:
>>
>> > Hi
>> >
>> > Its happen to me once and i didn't understand why but if you save
>> > configuration and reload the routers you will not have any neighbour
>> > anymore
>> > unless you put neighbour command.
>> >
>> >
>> > Regards
>> >
>> >
>> >
>> > -----Original Message-----
>> > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
>> > Anantha Subramanian Natarajan
>> > Sent: Sunday, May 24, 2009 8:25 PM
>> > To: Cisco certification
>> > Subject: OSPF neighbor on non-broadcast OSPF network type
>> >
>> > Hi All,
>> >
>> > I ran OSPF on an non-broadcast OSPF network type between R1 and R2 and
>> > saw the neighbor came up without configuring explicitly "neighbor "
>> command
>> > under the OSPF process.I was assuming the neighbor command is
>> > required.Kindly let me know on this and also if missed some basic on it.
>> >
>> > Thanks
>> >
>> > Regards
>> > Anantha Subramanian Natarajan
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon May 25 2009 - 03:43:58 ART