Re: OSPF neighbor on non-broadcast OSPF network type

Hi ,

If your Network Type is showing Non_Broadcast as per output of your show ip
ospf interface command .and you didnt configured Neighbor under ospf
process.
There is no way that you will find ospf neighbor . Infact router will not
show you any neighbor in any state .bcoj its not going to initiate
neighborship process.

Cheers !!!!
Rsharma

On 5/25/09, Divin Mathew John <divinjohn_at_gmail.com> wrote:
>
> Read this... it should clear things.!
>
> http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009470d.shtml
> Thanking You
>
> Yours Sincerely
>
> Divin Mathew John
> divinjohn_at_gmail.com
> divin_at_dide3d.com
> http://www.dide3d.com
> +91 9945430983
> +91 9846697191
> +974 5008916
> PGP PUBLIC KEY BLOCK @ http://www.dide3d.com/divin_Public_PGP_key.txt
> Sent from Bangalore, KA, India
>
> On Mon, May 25, 2009 at 3:41 AM, Divin Mathew John <divinjohn_at_gmail.com
> >wrote:
>
> > I guess you shud diable inverse arp, Broadcast from the framerelay map
> and
> > try!
> > Thanking You
> >
> > Yours Sincerely
> >
> > Divin Mathew John
> > divinjohn_at_gmail.com
> > divin_at_dide3d.com
> > http://www.dide3d.com
> > +91 9945430983
> > +91 9846697191
> > +974 5008916
> > PGP PUBLIC KEY BLOCK @ http://www.dide3d.com/divin_Public_PGP_key.txt
> > Sent from Bangalore, KA, India
> >
> > On Mon, May 25, 2009 at 3:42 AM, Santiago Enciso <
> > senciso_at_infocenter.com.py> wrote:
> >
> >> Also take a look at the frame relay mappings show frame-relay map
> >> If you have en entry "0.0.0.0" this could be the problem.
> >>
> >> Santiago E
> >>
> >>
> >> -----Mensaje original-----
> >> De: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] En nombre de
> >> Anantha Subramanian Natarajan
> >> Enviado el: Domingo, 24 de Mayo de 2009 15:09
> >> Para: hanan; Cisco certification
> >> Asunto: Re: OSPF neighbor on non-broadcast OSPF network type
> >>
> >> Hi Hanan,
> >>
> >> Thanks and will try that.
> >>
> >> Regards
> >> Anantha Subramanian Natarajan
> >>
> >> On Sun, May 24, 2009 at 1:47 PM, hanan <nouran_at_skynet.be> wrote:
> >>
> >> > Hi
> >> >
> >> > Its happen to me once and i didn't understand why but if you save
> >> > configuration and reload the routers you will not have any neighbour
> >> > anymore
> >> > unless you put neighbour command.
> >> >
> >> >
> >> > Regards
> >> >
> >> >
> >> >
> >> > -----Original Message-----
> >> > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf
> Of
> >> > Anantha Subramanian Natarajan
> >> > Sent: Sunday, May 24, 2009 8:25 PM
> >> > To: Cisco certification
> >> > Subject: OSPF neighbor on non-broadcast OSPF network type
> >> >
> >> > Hi All,
> >> >
> >> > I ran OSPF on an non-broadcast OSPF network type between R1 and R2
> and
> >> > saw the neighbor came up without configuring explicitly "neighbor "
> >> command
> >> > under the OSPF process.I was assuming the neighbor command is
> >> > required.Kindly let me know on this and also if missed some basic on
> it.
> >> >
> >> > Thanks
> >> >
> >> > Regards
> >> > Anantha Subramanian Natarajan
> >> >
> >> >
> >> > Blogs and organic groups at http://www.ccie.net
> >> >
> >> >
> _______________________________________________________________________
> >> > Subscription information may be found at:
> >> > http://www.groupstudy.com/list/CCIELab.html
> >>
> >>
> >> Blogs and organic groups at http://www.ccie.net
> >>
> >> _______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
> >>
> >>
> >> Blogs and organic groups at http://www.ccie.net
> >>
> >> _______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon May 25 2009 - 04:01:10 ART