RE: OSPF neighbor on non-broadcast OSPF network type

Did the adjacency reached the full state?
Were both sides non-broadcast? BCAST and NBCAST are compatible network
types.

Santiago E

-----Mensaje original-----
De: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] En nombre de
Anantha Subramanian Natarajan
Enviado el: Domingo, 24 de Mayo de 2009 15:09
Para: hanan; Cisco certification
Asunto: Re: OSPF neighbor on non-broadcast OSPF network type

Hi Hanan,

  Thanks and will try that.

Regards
Anantha Subramanian Natarajan

On Sun, May 24, 2009 at 1:47 PM, hanan <nouran_at_skynet.be> wrote:

> Hi
>
> Its happen to me once and i didn't understand why but if you save
> configuration and reload the routers you will not have any neighbour
> anymore
> unless you put neighbour command.
>
>
> Regards
>
>
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> Anantha Subramanian Natarajan
> Sent: Sunday, May 24, 2009 8:25 PM
> To: Cisco certification
> Subject: OSPF neighbor on non-broadcast OSPF network type
>
> Hi All,
>
> I ran OSPF on an non-broadcast OSPF network type between R1 and R2 and
> saw the neighbor came up without configuring explicitly "neighbor "
command
> under the OSPF process.I was assuming the neighbor command is
> required.Kindly let me know on this and also if missed some basic on it.
>
> Thanks
>
> Regards
> Anantha Subramanian Natarajan
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun May 24 2009 - 18:08:39 ART