Re: OSPF neighbor on non-broadcast OSPF network type

OSPF over NBMA ..hhnnn, remove the broadcast keyword from the frame maps!!
You will never experience it agian. :)

Regards,
Andy H.

On Mon, May 25, 2009 at 12:39 AM, Anantha Subramanian Natarajan <
anantha.natarajan_at_gravitant.com> wrote:

> Hi Hanan,
>
> Thanks and will try that.
>
> Regards
> Anantha Subramanian Natarajan
>
> On Sun, May 24, 2009 at 1:47 PM, hanan <nouran_at_skynet.be> wrote:
>
> > Hi
> >
> > Its happen to me once and i didn't understand why but if you save
> > configuration and reload the routers you will not have any neighbour
> > anymore
> > unless you put neighbour command.
> >
> >
> > Regards
> >
> >
> >
> > -----Original Message-----
> > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> > Anantha Subramanian Natarajan
> > Sent: Sunday, May 24, 2009 8:25 PM
> > To: Cisco certification
> > Subject: OSPF neighbor on non-broadcast OSPF network type
> >
> > Hi All,
> >
> > I ran OSPF on an non-broadcast OSPF network type between R1 and R2 and
> > saw the neighbor came up without configuring explicitly "neighbor "
> command
> > under the OSPF process.I was assuming the neighbor command is
> > required.Kindly let me know on this and also if missed some basic on it.
> >
> > Thanks
> >
> > Regards
> > Anantha Subramanian Natarajan
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
My Blog URL: http://ccieno.blogspot.com/
Blogs and organic groups at http://www.ccie.net