Do you 512 megs of RAM? Is this a lab or prod box?
Sent from handheld.
On May 16, 2009, at 8:13 AM, "Sadiq Yakasai" <sadiqtanko_at_gmail.com<mailto:sadiqtanko_at_gmail.com>> wrote:
Thanks Ryan,
Hmmm, I will try that one out after my lab...the problem might be related to this particular version I am running then: 8.2(1)
On Sat, May 16, 2009 at 12:55 PM, Ryan West <<mailto:rwest_at_zyedge.com>rwest_at_zyedge.com<mailto:rwest_at_zyedge.com>> wrote:
Sadiq,
8.x is riddled with bugs. Are you running an interim release version? I can't produce the same results on 8.0(4)28.
-ryan
-----Original Message-----
From: <mailto:nobody_at_groupstudy.com> nobody_at_groupstudy.com<mailto:nobody_at_groupstudy.com> [mailto:<mailto:nobody_at_groupstudy.com>nobody_at_groupstudy.com<mailto:nobody_at_groupstudy.com>] On Behalf Of Sadiq Yakasai
Sent: Saturday, May 16, 2009 6:23 AM
To: Farrukh Haroon
Cc: Cisco certification; Cisco certification
Subject: Re: 8.x - yet another one to be aware of!
No, its not! There is no logic here! just a ? and you get booted out of a
mode?
Besides, yes, i have configured the class map. I just didnt paste that part
of the config cos thats not really the point here.
Sadiq
On Sat, May 16, 2009 at 10:51 AM, Farrukh Haroon <<mailto:farrukhharoon_at_gmail.com>farrukhharoon_at_gmail.com<mailto:farrukhharoon_at_gmail.com>>wrote:
> Its kind of logical, you dont configure any parameter for the class command
> INSIDE the policy-map :). That is done globally (in the class definition).
>
> Regards
>
> Farruk
>
> On Sat, May 16, 2009 at 12:08 PM, Sadiq Yakasai <<mailto:sadiqtanko_at_gmail.com>sadiqtanko_at_gmail.com<mailto:sadiqtanko_at_gmail.com>>wrote:
>
>> So when you are trying to configure a policy-map on the ASA with the above
>> code, and you try and context-help command (?), it just drops you out of
>> the
>> policy-map sup config mode into global! Also drove me mad and took away
>> abit
>> of my confidence with these things:
>>
>> ASA(config)# policy-map POLICE_OUTSIDE
>> ASA(config-pmap)# class ICMP ?
>>
>> mpf-policy-map mode commands/options:
>> <cr>
>>
>> configure mode commands/options:
>> <cr>
>> ASA(config)# <------------------------------ YOU JUST GET
>> BOOTED
>> OFF THE POLICY-MAP CONFIG MODE!!!
>>
>>
>>
>> So beware guys!
>>
>> --
>> CCIE #19963
>>
>>
>> Blogs and organic groups at <http://www.ccie.net> http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> <http://www.groupstudy.com/list/CCIELab.html> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>
-- CCIE #19963 Blogs and organic groups at <http://www.ccie.net> http://www.ccie.netReceived on Sat May 16 2009 - 09:17:15 ART
This archive was generated by hypermail 2.2.0 : Mon Jun 01 2009 - 07:04:43 ART