Re: 8.x - yet another one to be aware of!

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsx30214

It's a caveat.

BTW ,

Please be aware that there are a number of bugs that have been fixed in the
latest 8.0.4.x interim releases (as well as the latest 7.2.4.x interims) -
which are not in the 8.2.1 release. The Sev 1-3 bug list is contained
within Table 5 in the 8.2 Release Notes:
http://www.cisco.com/en/US/docs/security/asa/asa82/release/notes/asarn82.html#wp332192

Regards,
Sushil
Cisco TAC
#20683

----- Original Message -----
From: "Sadiq Yakasai" <sadiqtanko_at_gmail.com>
To: "Ryan West" <rwest_at_zyedge.com>
Cc: "Farrukh Haroon" <farrukhharoon_at_gmail.com>; "Cisco certification"
<ccielab_at_groupstudy.com>; "Cisco certification" <security_at_groupstudy.com>
Sent: Saturday, May 16, 2009 5:13 AM
Subject: Re: 8.x - yet another one to be aware of!

> Thanks Ryan,
>
> Hmmm, I will try that one out after my lab...the problem might be related
> to
> this particular version I am running then: 8.2(1)
>
>
>
>
> On Sat, May 16, 2009 at 12:55 PM, Ryan West <rwest_at_zyedge.com> wrote:
>
>> Sadiq,
>>
>> 8.x is riddled with bugs. Are you running an interim release version? I
>> can't produce the same results on 8.0(4)28.
>>
>> -ryan
>>
>> -----Original Message-----
>> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
>> Sadiq Yakasai
>> Sent: Saturday, May 16, 2009 6:23 AM
>> To: Farrukh Haroon
>> Cc: Cisco certification; Cisco certification
>> Subject: Re: 8.x - yet another one to be aware of!
>>
>> No, its not! There is no logic here! just a ? and you get booted out of a
>> mode?
>>
>> Besides, yes, i have configured the class map. I just didnt paste that
>> part
>> of the config cos thats not really the point here.
>>
>> Sadiq
>>
>> On Sat, May 16, 2009 at 10:51 AM, Farrukh Haroon <farrukhharoon_at_gmail.com
>> >wrote:
>>
>> > Its kind of logical, you dont configure any parameter for the class
>> command
>> > INSIDE the policy-map :). That is done globally (in the class
>> definition).
>> >
>> > Regards
>> >
>> > Farruk
>> >
>> > On Sat, May 16, 2009 at 12:08 PM, Sadiq Yakasai <sadiqtanko_at_gmail.com
>> >wrote:
>> >
>> >> So when you are trying to configure a policy-map on the ASA with the
>> above
>> >> code, and you try and context-help command (?), it just drops you out
>> >> of
>> >> the
>> >> policy-map sup config mode into global! Also drove me mad and took
>> >> away
>> >> abit
>> >> of my confidence with these things:
>> >>
>> >> ASA(config)# policy-map POLICE_OUTSIDE
>> >> ASA(config-pmap)# class ICMP ?
>> >>
>> >> mpf-policy-map mode commands/options:
>> >> <cr>
>> >>
>> >> configure mode commands/options:
>> >> <cr>
>> >> ASA(config)# <------------------------------ YOU JUST GET
>> >> BOOTED
>> >> OFF THE POLICY-MAP CONFIG MODE!!!
>> >>
>> >>
>> >>
>> >> So beware guys!
>> >>
>> >> --
>> >> CCIE #19963
>> >>
>> >>
>> >> Blogs and organic groups at http://www.ccie.net
>> >>
>> >> _______________________________________________________________________
>> >> Subscription information may be found at:
>> >> http://www.groupstudy.com/list/CCIELab.html
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >
>>
>>
>> --
>> CCIE #19963
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> CCIE #19963

Blogs and organic groups at http://www.ccie.net
Received on Fri May 22 2009 - 15:17:04 ART