RE: 8.x - yet another one to be aware of!

Sadiq,

8.x is riddled with bugs. Are you running an interim release version? I can't produce the same results on 8.0(4)28.

-ryan

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of Sadiq Yakasai
Sent: Saturday, May 16, 2009 6:23 AM
To: Farrukh Haroon
Cc: Cisco certification; Cisco certification
Subject: Re: 8.x - yet another one to be aware of!

No, its not! There is no logic here! just a ? and you get booted out of a
mode?

Besides, yes, i have configured the class map. I just didnt paste that part
of the config cos thats not really the point here.

Sadiq

On Sat, May 16, 2009 at 10:51 AM, Farrukh Haroon <farrukhharoon_at_gmail.com>wrote:

> Its kind of logical, you dont configure any parameter for the class command
> INSIDE the policy-map :). That is done globally (in the class definition).
>
> Regards
>
> Farruk
>
> On Sat, May 16, 2009 at 12:08 PM, Sadiq Yakasai <sadiqtanko_at_gmail.com>wrote:
>
>> So when you are trying to configure a policy-map on the ASA with the above
>> code, and you try and context-help command (?), it just drops you out of
>> the
>> policy-map sup config mode into global! Also drove me mad and took away
>> abit
>> of my confidence with these things:
>>
>> ASA(config)# policy-map POLICE_OUTSIDE
>> ASA(config-pmap)# class ICMP ?
>>
>> mpf-policy-map mode commands/options:
>> <cr>
>>
>> configure mode commands/options:
>> <cr>
>> ASA(config)# <------------------------------ YOU JUST GET
>> BOOTED
>> OFF THE POLICY-MAP CONFIG MODE!!!
>>
>>
>>
>> So beware guys!
>>
>> --
>> CCIE #19963
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>

-- 
CCIE #19963
Blogs and organic groups at http://www.ccie.net