Re: CE to CE routing issue

Hi Splinter,

trace 12.12.12.12 from R3 and see where its stoping and result.

make sure BB1 has reachability to R3 IP's.

post the Router3 configuration.
and show ip route 12.12.12.12

Regards,
SM

On Tue, May 12, 2009 at 3:24 PM, Splinter <splinter330_at_gmail.com> wrote:
> Hi All,
>
> Sorry for the long post.
>
> please need some assistance with this routing issue.
>
> here is my setup
>
> BB1 ----(OSPF)---- R6 ---(ISIS)--- R2 ---(OSPF)-vrf XYZ--- R3
>
> I have a route being advertised from BB1 12.12.12.12/32 via OSPF to R6 then
> redistributed into ISIS. I see the route on router R2 routing table. and i
> can ping BB1 12.12.12.12 but i cannot ping from R3 sitting in VRF Site XYZ.
> what am i missing.
>
> R2#ping 12.12.12.12
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 12.12.12.12, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 12/16/28 ms
> R2#
>
>
> BB1:
> router ospf 100
> router-id 12.12.12.12
> log-adjacency-changes
> network 12.12.12.12 0.0.0.0 area 0
> network 192.5.10.254 0.0.0.0 area 0
>
> R6:
> router ospf 100
> router-id 10.10.6.6
> log-adjacency-changes
> redistribute connected subnets
> redistribute static subnets
> redistribute isis level-1-2 subnets
> network 192.5.10.6 0.0.0.0 area 0
>
> router isis
> net 49.0010.0000.0000.0006.00
> metric-style wide
> mpls traffic-eng router-id Loopback0
> mpls traffic-eng level-2
> redistribute ospf 100 level-1-2
> redistribute bgp 267 route-map LABEL level-1-2
> redistribute isis ip level-2 into level-1 distribute-list 100
>
> R2:
> router isis
> net 49.0010.0000.0000.0002.00
> metric-style wide
> redistribute bgp 267 route-map LABEL level-1-2
> redistribute isis ip level-2 into level-1 distribute-list 100
>
> router ospf 100 vrf XYZ
> router-id 172.10.23.2
> log-adjacency-changes
> redistribute bgp 267 metric 200 subnets
> network 172.10.23.0 0.0.0.255 area 0
>
> address-family ipv4 vrf XYZ
> redistribute ospf 100 vrf XYZ match internal external 1 external 2
> no synchronization
> exit-address-family.
>
>
> Thanks
>
> Splinter
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue May 12 2009 - 15:59:34 ART