Re: Best image for ccie4.0 for use with dynamips!!

c3640-jk9s-mz.124-13a.bin

No. Only OSPF and RIPv6

##################################################
R1(config)#ipv6 router ?
  ospf Open Shortest Path First (OSPF)
  rip IPv6 Routing Information Protocol (RIPv6)
##################################################

Charles

                                                                                                                                 
  From: Andy Hogard <andyhogard_at_gmail.com>
                                                                                                                                 
  To: Charles.Henson_at_regions.com
                                                                                                                                 
  Cc: Cisco certification <ccielab_at_groupstudy.com>, Divin Mathew John <divinjohn_at_gmail.com>, nobody_at_groupstudy.com
                                                                                                                                 
  Date: 05/07/2009 09:42 AM
                                                                                                                                 
  Subject: Re: Best image for ccie4.0 for use with dynamips!!
                                                                                                                                 

Hi Charles,

Does that image support eigrp for ipv6?! Let me know the ios file name
please, if it runs eigrp ipv6.

Greets,
Andy H.

On Thu, May 7, 2009 at 7:10 PM, <Charles.Henson_at_regions.com> wrote:

> Internetwork Expert Vol2 Dynamips .net Router 1 - - -
>
> Be sure and uncompress the binary before loading. Much faster.
>
>
>
######################################################################################

> Connected to Dynamips VM "R1" (ID 17, type c3600) - Console port
>
>
> R1(config)#do sho ver
> Cisco IOS Software, 3600 Software (C3640-JK9S-M), Version 12.4(13a),
> RELEASE SOFTWARE (fc1)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2007 by Cisco Systems, Inc.
> Compiled Tue 06-Mar-07 20:25 by prod_rel_team
>
> ROM: ROMMON Emulation Microcode
> ROM: 3600 Software (C3640-JK9S-M), Version 12.4(13a), RELEASE SOFTWARE
> (fc1)
>
> R1 uptime is 19 hours, 9 minutes
> System returned to ROM by unknown reload cause - suspect
> boot_data[BOOT_COUNT] 0x0, BOOT_COUNT 0, BOOTDATA 19
> System image file is "tftp://255.255.255.255/unknown"
>
>
> This product contains cryptographic features and is subject to United
> States and local country laws governing import, export, transfer and
> use. Delivery of Cisco cryptographic products does not imply
> third-party authority to import, export, distribute or use encryption.
> Importers, exporters, distributors and users are responsible for
> compliance with U.S. and local country laws. By using this product you
> agree to comply with applicable laws and regulations. If you are unable
> to comply with U.S. and local laws, return this product immediately.
>
> A summary of U.S. laws governing Cisco cryptographic products may be
found
> at:
> http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
>
> If you require further assistance please contact us by sending email to
> export_at_cisco.com.
>
> Cisco 3640 (R4700) processor (revision 0xFF) with 247808K/12288K bytes of
> memory.
> Processor board ID 00000000
> R4700 CPU at 100MHz, Implementation 33, Rev 1.2
> 1 FastEthernet interface
> 4 Serial interfaces
> DRAM configuration is 64 bits wide with parity enabled.
> 125K bytes of NVRAM.
> 8192K bytes of processor board System flash (Read/Write)
> 0K bytes of PCMCIA Slot0 flash (Read/Write)
>
> Configuration register is 0x2142
>
> R1(config)#
>
>
#############################################################################

>
> Charles
>
>
>
>
> From: Andy Hogard <andyhogard_at_gmail.com>
>
> To: Divin Mathew John <divinjohn_at_gmail.com>
>
> Cc: Cisco certification <ccielab_at_groupstudy.com>
>
> Date: 05/07/2009 03:18 AM
>
> Subject: Re: Best image for ccie4.0 for use with dynamips!!
>
>
>
>
>
>
> Hi, thanks for the quick response!!
>
> Can you give me the exact name of the image you are using for a 3600
> platform please.
>
> On Thu, May 7, 2009 at 1:38 PM, Divin Mathew John
> <divinjohn_at_gmail.com>wrote:
>
> > 12.4 Advanced Enterprise on 7200 and 3600 or i think 12.4 ADVanced IP
> > services also has MPLS
> > Thanking You
> >
> > Yours Sincerely
> >
> > Divin Mathew John
> > divinjohn_at_gmail.com
> > divin_at_dide3d.com
> > http://www.dide3d.com
> > +91 9945430983
> > +91 9846697191
> > +974 5008916
> > PGP PUBLIC KEY BLOCK @ http://www.dide3d.com/divin_Public_PGP_key.txt
> > Sent from Bangalore, KA, India
> >
> >
> > On Thu, May 7, 2009 at 1:32 PM, Andy Hogard <andyhogard_at_gmail.com>
> wrote:
> > > Hi,
> > >
> > > I wanted to know what would be the best possible image to be used
with
> > > dynamips ..the one which can be easy on the hardware underneath!!
> > >
> > >
> > > Upto now, dynamips can emulate the 1700s, 2600s, 3600s, 3700s and
> 7200s.
> > >
> > >
> > > Greets!
> > > Andy H.
> > >
> > > --
> > > My Blog URL: http://ccieno.blogspot.com/
> > >
> > >
> > > Blogs and organic groups at http://www.ccie.net
> > >
> > >
Received on Thu May 07 2009 - 09:51:07 ART