RE: Voice issue

Sounds like you need some more PVDMs to do what you want to do.
 
thanks,
Brad Ellis
CCIE#5796 (R&S / Security)
CCSI# 30482
CEO / President
CCBOOTCAMP - A Cisco Learning Partner (CLP)
Email: brad_at_ccbootcamp.com
Toll Free: 877-654-2243
Direct: +1-702-968-5100 = Outside the USA
FAX: +1-702-446-8012
YES! We take Cisco Learning Credits!
Training And Remote Racks: http://www.ccbootcamp.com

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
sameer inam
Sent: Sunday, April 26, 2009 12:51 AM
To: ccielab_at_groupstudy.com; costephe_at_cisco.com
Subject: Voice issue

Hello Guys,

I need some help , I trying to install the New Voice gateway due to
some
reason its gave me errors, please see below , when I configured the
controller
E1 1/0 it gave me the below error ..

#controlLer E1 1/0
controller)#pr
controller)#pri-group ?

pri-group timeslots 1-31

% Not enough DSP resources available to configure pri-group on
controller E1
1/0
% The remaining dsp resources are enough for 0 time slots.
% For current codec complexity, 2 extra dsp(s) are required to create
this
voice
 port.

NM-HDV2-2T1/E1 (Network E1 CONTROLLER )

Thanks,

Sameer
Received on Sun Apr 26 2009 - 00:59:16 ART