Re: Stubborn router.

You're right, it should not.
But if you for example start RIP process, using the following commands:

router rip
 no auto summ
 ver 2
 redistribute connected

and then if you do a "show runn | s r r" (or "| b r r" if you're running
NON-T), you will not see a line regarding rip.
But once you go in the process configuration mode and add a network line,
like network 10.0.0.0
suddenly you'll see all the previous command appear in show runn.

On Tue, Apr 21, 2009 at 4:15 PM, Paul Cosgrove <paul.cosgrove_at_gmail.com>wrote:

> I'm missing a NOT in the last line....
>
>
> Paul Cosgrove wrote:
>
>> I did indeed confirm the network type, and also ran debugs which showed
>> that no hellos were sent out the interface. The problem was that the router
>> configuration contained two neighbor commands which were not being parsed.
>> The same two commands could be added a second time to the config (as you
>> can see below). The router configuration should accept multiple copies of
>> the same command, regardless of the ospf area type.
>>
>> Paul.
>>
>> Pavel Bykov wrote:
>>
>>> Just wondering, have you checked using "show ip ospf interface" for the
>>> operational network type?
>>>
>>> On Fri, Apr 17, 2009 at 7:54 PM, Paul Cosgrove <paul.cosgrove_at_gmail.com
>>> >wrote:
>>>
>>>
>>>
>>>> Just tried a simple topology with a hub and spoke non-broadcast ospf
>>>> network. The neighbor commands did not take effect the first time
>>>> around
>>>> (no neighbors listed) and clearing ospf had no effect. To fix it I
>>>> tried to
>>>> remove and reapply the neighbor commands. Neighbor relationships are
>>>> now
>>>> formed, but it has left me with an interesting configuration. I guess
>>>> my
>>>> router is being a little stubborn today. :-)
>>>>
>>>> router ospf 1
>>>> log-adjacency-changes
>>>> network 141.1.0.0 0.0.0.255 area 1
>>>> network 141.1.123.0 0.0.0.255 area 0
>>>> network 150.1.2.0 0.0.0.255 area 0
>>>> neighbor 141.1.123.3
>>>> neighbor 141.1.123.1
>>>> neighbor 141.1.123.1
>>>> neighbor 141.1.123.3
>>>> !
>>>>
>>>> Anyone else see this in 12.4(23) or other releases?
>>>>
>>>> Paul.
>>>>
>>>>
>>>> Blogs and organic groups at http://www.ccie.net
>>>>
>>>> _______________________________________________________________________
>>>> Subscription information may be found at:
>>>> http://www.groupstudy.com/list/CCIELab.html
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>

-- 
Pavel Bykov
----------------
Don't forget to help stopping the braindumps, use of which reduces value of
your certifications. Sign the petition at http://www.stopbraindumps.com/
Blogs and organic groups at http://www.ccie.net