Re: NSSA ABR with distribute-list out???

Bryan,

Try using a "distribute-list in" instead on the router to which the backbone
is connected !
distribute-list out works only with ASBR.

Tharak Abraham Luke

On Sat, Apr 18, 2009 at 10:48 PM, Modular <modulartx_at_gmail.com> wrote:

> I was under the impression that with an NSSA, on the ABR, not the ASBR, you
> could use "summary-address"
> to summarize the type 7 LSAs before the ABR advertised them out to the
> backbone. I Labed it up and it worked
> great. :-)
>
> I was also under the impression that you could do the same thing with
> "distribute-list out". (If it's an NSSA).
> I tried it out in the same Lab environment that I used for the
> summary-address test and could not get it to work.
> If I used it on the ASBR it worked great and prevented the specified routes
> from being sent out into OSPF.
> But, when I tried it on the ABR if failed.
>
> Is this actually possible or am I crazy (again) and remember it wrong?
>
> Thanks,
> Bryan R.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sat Apr 18 2009 - 23:40:22 ART