Re: dot1q tunneling with COS

hehe...........
you are doing it on the interface level.
try on the config t level

e.g.

config t
  *l2protocol-tunnel cos 3

frog
*
On Mon, Apr 13, 2009 at 3:39 PM, Ruhann <groupstudy_at_ru.co.za> wrote:

> Hi guys
>
> Busy configuring a dot1Q tunnel from one task and the task asks that tunnel
> frame should have a COS of 3.
>
> The solution is the following:
> interface FastEthernet0/4
> switchport access vlan 123
> switchport mode dot1q-tunnel
> l2protocol-tunnel cdp
> * l2protocol-tunnel cos 3 *
> no cdp enable
> end
> I do not have that as a option of any of my switches nor the rack that I'm
> renting.
>
> * l2protocol-tunnel cos 3 *
>
> The IOS versions I tried this on is :
> C3550 Software (C3550-IPSERVICESK9-M), Version 12.2(44)SE3, RELEASE
> SOFTWARE (fc2)
> C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2(46)SE, RELEASE
> SOFTWARE (fc2)
> C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2(25)SEE4, RELEASE
> SOFTWARE (fc1)
> Enabling mls qos, or changing the sdm profile does not seem the make any
> difference.
>
> Any Ideas on what im missing?
>
> Regards
> --
> <ruhann>
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Apr 13 2009 - 15:46:28 ART