RE: Cat 6500 VSS MultiChassis Etherchannel (MEC) to Nexus

Hello Reza,

It should work !! From 6k VSS/Nexus point of view, it just connected to
other system.
But you have to keep in mind that VSS is virtually one system but Nexus
is two different systems but vpc is only to have singlelogical ether
channel.
While you are designing the network make sure the traffic is not sent
across the links between the Nexus systems.

Regards,
Ahamed

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Reza Toghraee
Sent: Sunday, April 05, 2009 10:21 PM
To: 'Marcus Bedford'; 'groupstudycisco'
Cc: 'Wes Stevens'; 'ccielab'
Subject: RE: Cat 6500 VSS MultiChassis Etherchannel (MEC) to Nexus
Virtual Port Channel (VPC)

Hello,

Thanks for your responses.
Nexus vPC works fine with normal etherchannels, easily works in "on" or
"Lacp" mode and brings the portchannel UP. Only the Layer 2 Port
channels are allowed. Only 10GB physical interfaces are allowed. Needs
keepalives to monitor the link.

VSS MEC also works fine with normal etherchannels, easily forms in "on"
or "lacp" or "pagp" and brings the portchannel UP. Needs a protocol to
monitor the DAD.

But my question is that is it possible to create an etherchannel link
between 2 CAT6500 VSS with MEC and 2 NEXUS 7000 with vPC ?
Or in other way is MEC compatible with vPC?

Thanks
Reza

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Marcus Bedford
Sent: Monday, April 06, 2009 8:29 AM
To: groupstudycisco
Cc: Wes Stevens; Reza Toghraee; ccielab
Subject: Re: Cat 6500 VSS MultiChassis Etherchannel (MEC) to Nexus
Virtual Port Channel (VPC)

Also something to keep in mind is that nexus only support LACP and not
PaGP.
Marcus

-----Original Message-----
From: "groupstudycisco" <groupstudycisco_at_gmail.com>
Sent: Sunday, April 5, 2009 7:43pm
To: "Wes Stevens" <wrsteve33-gsccie_at_yahoo.com>
Cc: "Reza Toghraee" <reza_at_toghraee.com>, "ccielab"
<ccielab_at_groupstudy.com>
Subject: Re: Cat 6500 VSS MultiChassis Etherchannel (MEC) to Nexus
Virtual Port Channel (VPC)

Yes, Nexus supports vPC's since 4.13. Current version on CCO is 4.1.4
and recomended.

Wes Stevens wrote:
> VSS can only do 2 switches right now. I don't think vpc on the nexus
is out in production code yet.
>
>
>
>
> ________________________________
> From: Reza Toghraee <reza_at_toghraee.com>
> To: ccielab <ccielab_at_groupstudy.com>
> Sent: Sunday, April 5, 2009 3:18:06 PM
> Subject: Cat 6500 VSS MultiChassis Etherchannel (MEC) to Nexus Virtual
Port Channel (VPC)
>
> Hi group
>
>
>
> I'm trying to figure out the possibility of creating a single logical
link
> between (2 Cat 6500 in VSS mode) and (2 Nexus switches) with 4
physical 10GB
> links between the 6500s and Nexus, in full mesh.
>
> 6500 supports MEC, and Nexus supports vPC, but I want to know is it
possible
> to connect them together or not.
>
>
>
>
>
> Any ideas?
>
>
>
> Best Regards
>
> Reza Toghraee
>
>
> Blogs and organic groups at http://www.ccie.net
>
>
Received on Mon Apr 06 2009 - 09:09:08 ART