Re: Switches with Dynamips!

Thank you all for the response.

I have one doubt with this set-up:

 [[ETHSW SW1]]
 1 = access 101
 15 = dot1q 1 NIO_gen_eth:eth1

Breakout switch connecting to the server running dynamips with a 802.1q
trunk carrying all the uplinks (about 13 vlans) (one physical link) but not
sure what should be port configuration on the breakout switch connecting the
real switches.

Regards,
Vijay Karanth

2009/4/4 Kelly <kelly_at_cliffhanger.com>

>
> Here's a good start for you.
>
> This is how a friend of mine did it and,
> it worked well for him.
>
> http://www.internetworkpro.org/wiki/Dynamips_w/_real_switches
>
> kelly
>
>
>
> --
> Quoting Anbu <ksanpu_at_gmail.com>:
> Hi
> is there any way to connect our dynamips routers with real
> Switches (
> 3550 /3560) with only one NIC card in the Laptop ?
>
> Regards,
> Nanthee
>
> On Sat, Apr 4, 2009 at 5:57 PM, rakesh m <raaki.88_at_gmail.com>
> wrote:
>
> > On Sat, Apr 4, 2009 at 5:25 PM, Vijay Karanth <
> vijay.karanth_at_gmail.com
> > >wrote:
> >
> > > Hi,
> > >
> > > I'm using Dynamips (version 0.2.8-RC2-x86) on Fedora 10 for
> practising
> > R&S
> > > lab, I'm facing couple of issue with it, hoping some one might
> have a
> > > solution for it. The main issue which I'm facing (as you might
> all know
> > > that
> > > we cannot emulate switches on Dynamips) by not emulating the
> switches.
> > > Because of this I'm unable to practice (ISL, PAGP/LACP, layer 3
> > > port-channels, dot1q-tunnelling, l2tunnleing, Private-VLANs,
> etc...).
> > >
> > > Please let me know if some has a alternative solution for this
> issue, I'm
> > > wondering if there is a way that we can connect a physical
> switch to the
> > > Dynamips router? Any information on this are helpful.
> > >
> > > Regards,
> > > Vijay Karanth
> > >
> > >
> > > Blogs and organic groups at http://www.ccie.net
> > >
> > >
> _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > there is no other emulator / simulator alternative from dynamips
> or gns3
> > sadly . the only thing you could do is to have a couple of 3550 or
> 3560 and
> > attach it to your pc and emulate router along with physcial switch
> .. this
> > has been the alternative for many ..
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sat Apr 04 2009 - 22:48:00 ART