Re: Switches with Dynamips!

Hi Vijay

[[ETHSW SW1]]
1 = access 101
2 = access 102
3 = access 103
4 = access 104
5 = access 105
6 = access 106
7 = access 201
8 = access 202
9 = access 203
10 = access 204
11 = access 205
12 = access 206
13 = access 224
14 = access 124
15 = dot1q 1 NIO_gen_eth:eth1

On the breakout switch, you need to create around 14 vlans (101, 102, 124
etc) in this case . Assign a port on the breakout switch to each of those
vlans (access ports). Connect those ports to the real switch, as per your
physical topology.

eg : R1's F0/0 goes to SW1 1, which is an access port in vlan 101. Create
vlan 101 on the breakout switch. Assign a port on the switch to vlan 101
(access port). Connect that port to the real switch.

HTH

Lejoe

On Sun, Apr 5, 2009 at 3:18 AM, Vijay Karanth <vijay.karanth_at_gmail.com>
wrote:
>
> Thank you all for the response.
>
> I have one doubt with this set-up:
>
> [[ETHSW SW1]]
> 1 = access 101
> 15 = dot1q 1 NIO_gen_eth:eth1
>
> Breakout switch connecting to the server running dynamips with a 802.1q
> trunk carrying all the uplinks (about 13 vlans) (one physical link) but
not
> sure what should be port configuration on the breakout switch connecting
the
> real switches.
>
> Regards,
> Vijay Karanth
>
>
> 2009/4/4 Kelly <kelly_at_cliffhanger.com>
>
> >
> > Here's a good start for you.
> >
> > This is how a friend of mine did it and,
> > it worked well for him.
> >
> > http://www.internetworkpro.org/wiki/Dynamips_w/_real_switches
> >
> > kelly
> >
> >
> >
> > --
> > Quoting Anbu <ksanpu_at_gmail.com>:
> > Hi
> > is there any way to connect our dynamips routers with real
> > Switches (
> > 3550 /3560) with only one NIC card in the Laptop ?
> >
> > Regards,
> > Nanthee
> >
> > On Sat, Apr 4, 2009 at 5:57 PM, rakesh m <raaki.88_at_gmail.com>
> > wrote:
> >
> > > On Sat, Apr 4, 2009 at 5:25 PM, Vijay Karanth <
> > vijay.karanth_at_gmail.com
> > > >wrote:
> > >
> > > > Hi,
> > > >
> > > > I'm using Dynamips (version 0.2.8-RC2-x86) on Fedora 10 for
> > practising
> > > R&S
> > > > lab, I'm facing couple of issue with it, hoping some one
might
> > have a
> > > > solution for it. The main issue which I'm facing (as you
might
> > all know
> > > > that
> > > > we cannot emulate switches on Dynamips) by not emulating the
> > switches.
> > > > Because of this I'm unable to practice (ISL, PAGP/LACP, layer
3
> > > > port-channels, dot1q-tunnelling, l2tunnleing, Private-VLANs,
> > etc...).
> > > >
> > > > Please let me know if some has a alternative solution for
this
> > issue, I'm
> > > > wondering if there is a way that we can connect a physical
> > switch to the
> > > > Dynamips router? Any information on this are helpful.
> > > >
> > > > Regards,
> > > > Vijay Karanth
> > > >
> > > >
> > > > Blogs and organic groups at http://www.ccie.net
> > > >
> > > >
> > _______________________________________________________________________
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > there is no other emulator / simulator alternative from
dynamips
> > or gns3
> > > sadly . the only thing you could do is to have a couple of 3550
or
> > 3560 and
> > > attach it to your pc and emulate router along with physcial
switch
> > .. this
> > > has been the alternative for many ..
> > >
> > >
> > > Blogs and organic groups at http://www.ccie.net
> > >
> > >
> > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Apr 05 2009 - 09:17:35 ART