Re: vlan dot1q tag native ....

vlan dot1q tag native just means any untag frame will be tagg with the
native vlan header..

you problem is not because of that command nor should it fix it.

between you 2 switches you have a trunk, the native vlan on both side must
be the same:
 sw tr vlan native 50 on both sides

double check this with 'sh int trunk'

On Sun, Mar 8, 2009 at 4:00 AM, JAZ <azeemu_at_gmail.com> wrote:

> Hi Guys,
> I am using 2 sw
> sw1----sw2
> I configure dot1Q on both switches. On sw1 I changed native VLAN 10 . Then
> ,
> I am getting error regarding native vlan mismatch.I used command
> vlan dot1q tag native
> To sent native vlan tagged .... but I am still getting vlan mismatch error
> !
> Need help
> Thanks
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
<ruhann>
Blogs and organic groups at http://www.ccie.net