Re: FWSM

Hi Ali,
Are you running FWSM with IOS 2.3?
Are you running FWSM in multiple context?

If you are running FWSM 2.3 with Multiple context, This issue is common

# Change the mode on FWSM to single ( command on system context of FWSM -
'mode single'
# Reconfigure the Firewall Vlan Group with a single vlan ( say 999)
# Upgarde the FWSM to 3.1 using the Vlan ( say 999)
# Upgrade the ASDM
# Reconfigure the FWSM to multiple mode ('command syntatx 'mode multiple' )

Regards
Nitin

On Fri, Apr 3, 2009 at 10:07 AM, Ali El Moussaoui <mousawi.ali_at_gmail.com>wrote:

> firewall module 1 vlan-group 1
> firewall vlan-group 1 999-1001,1010,1017,1018,1020,2000
>
> The vlan i added was 999 and it is in the vlan database. (sh vlan br)
>
> Ali
>
> On Fri, Apr 3, 2009 at 7:13 AM, Robert Steeneken <r.steeneken_at_gmail.com
> >wrote:
>
> > did you put the firewall vlan group to the FWSM module?
> >
> > firewall module X vlan-group X,X,X
> >
> > On Thu, Apr 2, 2009 at 5:21 PM, Ali El Moussaoui <
> mousawi.ali_at_gmail.com>wrote:
> >
> >> Hello Guys,
> >>
> >> I am new to this FWSM and when i configure a new vlan under "xyz"
> context
> >> i
> >> see the following under sh int
> >> "Available but not assigned from Supervisor"
> >>
> >> I added the vlan to the firewall vlan-group and allocated the vlan for
> the
> >> "xyz" context.
> >>
> >> what am i missing?
> >> Ali
> >>
> >>
> >> Blogs and organic groups at http://www.ccie.net
> >>
> >> _______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sat Apr 04 2009 - 16:56:52 ART