You would not need the distribute-list per the requirements when using
'auto-summary' and BB2 should get the summary routes
On Thu, Apr 2, 2009 at 9:07 AM, Cisco Fanatic <ebay_products_at_hotmail.com>wrote:
> No routes to BB2 after removing "no auto-summary" command under the RIP
> process.
>
> !
> router rip
> version 2
> passive-interface default
> no passive-interface Serial0/1
> no passive-interface Ethernet1/0
> network 163.1.0.0
> network 192.10.1.0
> distribute-list prefix RIP_SUMMARY out Ethernet1/0
> !
> ip prefix-list RIP_SUMMARY seq 5 permit 163.1.0.0/18
> !
Blogs and organic groups at http://www.ccie.net
Received on Thu Apr 02 2009 - 10:35:00 ART
This archive was generated by hypermail 2.2.0 : Mon May 04 2009 - 07:39:11 ART