Re: Troubleshooting in CCIE LAB

From: Puneet Kathpalia (ccie4lf@gmail.com)
Date: Tue Mar 31 2009 - 17:49:13 ART

I would also recommend that you read the prerequisites of the lab very
well... sometimes it will refer what can or can not be changed .. or it
might refer that there are configs that is incorrect ... Read that first
page well.. that should help in what you can and sometimes can not change
..

I wish I cud share my experience with the SP lab without going into details
:) .. lets just say that I had to scratch my head in the last few sections
as it was not working and it never occurred to me so far down the lab that
there would be something preconfigured (and misconfigured as I might
add) that can break the desired output.. I got it fixed (and passed as I
might add) but .. that is the way it is and you should be prepared for the
same.. dont think that just because you fixed the initial configs at the
initial stage that you are off the hook! :)

Keep that in mind .. Wish you all the best for your lab and hope to see your
success story soon :)

All the best
Puneet

On 4/1/09, Nauman Habib <mrnauman@gmail.com> wrote:
>
> Dear Experts,
>
> In the CCIE R & S exam, there is an initial Troubleshooting section .
>
> I am a little confused about it ,
>
> if we are not allowed to change the pre-config's - then what kind of
> troubleshooting would it be?
>
> and what are the changes that we can make - and what we cannot make ?
>
> like if there is a subnet mask - miss configured !! so we have to change
> the
> pre-config - right !
> can you please explain this trouble-shooting part.
>
> thanks in advance.
>
> Reagards
>
> Nauman
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
> 

-- 
CCIE X 2 (SP, R&S), CCNP, CCDP, Cisco Certified VPN Specialist, CCNA, CCDA,
Security+, MCP, MCSA

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:08 ART