Re: Troubleshooting in CCIE LAB

From: Nick (ccieaz@googlemail.com)
Date: Tue Mar 31 2009 - 18:06:58 ART


Hi Nauman,

Scott Morris from IE did a 3 part blog on this recently. It was very good
and well worth looking into:

http://blog.internetworkexpert.com/2009/02/16/ccie-troubleshooting-part-1-is-it-really-my-fault/

http://blog.internetworkexpert.com/2009/02/17/ccie-troubleshooting-part-2-dude-wheres-my-routing/

http://blog.internetworkexpert.com/2009/02/18/ccie-troubleshooting-part-3-ummmm-houston-we-have-a-problem/

Hope that helps.

Nick

2009/3/31 Puneet Kathpalia <ccie4lf@gmail.com>

> I would also recommend that you read the prerequisites of the lab very
> well... sometimes it will refer what can or can not be changed .. or it
> might refer that there are configs that is incorrect ... Read that first
> page well.. that should help in what you can and sometimes can not change
> ..
>
> I wish I cud share my experience with the SP lab without going into details
> :) .. lets just say that I had to scratch my head in the last few sections
> as it was not working and it never occurred to me so far down the lab that
> there would be something preconfigured (and misconfigured as I might
> add) that can break the desired output.. I got it fixed (and passed as I
> might add) but .. that is the way it is and you should be prepared for the
> same.. dont think that just because you fixed the initial configs at the
> initial stage that you are off the hook! :)
>
> Keep that in mind .. Wish you all the best for your lab and hope to see
> your
> success story soon :)
>
> All the best
> Puneet
>
>
> On 4/1/09, Nauman Habib <mrnauman@gmail.com> wrote:
> >
> > Dear Experts,
> >
> > In the CCIE R & S exam, there is an initial Troubleshooting section .
> >
> > I am a little confused about it ,
> >
> > if we are not allowed to change the pre-config's - then what kind of
> > troubleshooting would it be?
> >
> > and what are the changes that we can make - and what we cannot make ?
> >
> > like if there is a subnet mask - miss configured !! so we have to change
> > the
> > pre-config - right !
> > can you please explain this trouble-shooting part.
> >
> > thanks in advance.
> >
> > Reagards
> >
> > Nauman
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
>
> --
> CCIE X 2 (SP, R&S), CCNP, CCDP, Cisco Certified VPN Specialist, CCNA, CCDA,
> Security+, MCP, MCSA
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net



This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:08 ART