From: Jared Scrivener (jscrivener@ipexpert.com)
Date: Wed Mar 11 2009 - 20:53:32 ARST
I do the same thing, Eduardo. You aren't alone there. :)
Cheers,
Jared Scrivener CCIE3 #16983 (R&S, Security, SP), CISSP
Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Mailto: jscrivener@ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Eduardo Rossettini
Sent: Wednesday, 11 March 2009 6:31 PM
To: robertcuello@hotmail.com
Cc: ccielab@groupstudy.com
Subject: Re: Clear Frame-relay mappings
My personal approach is always to shutdown the interface before starting the
FR config, after setting "no frame-relay inverse-arp" I enable the interface
again.
HTH
Eduardo
On Thu, Mar 12, 2009 at 10:10 AM, <robertcuello@hotmail.com> wrote:
> Guys,
>
> After I configure an interface with "no frame-relay inverse-arp" and "no
> arp
> frame-relay", I show a bunch of mapping that it got from the inverse arp
> mapping.
>
> interface Serial0/0/0
> ip address 10.24.45.4 255.255.255.0
> encapsulation frame-relay
> no arp frame-relay
> frame-relay map ip 10.24.45.5 405 broadcast
> no frame-relay inverse-arp
>
> I have tried to use the "clear frame-relay inarp", but it does not clear
> the
> mapping until I reload the router. Is this the fastest way to clear the
> inverse
> arp mapping since the above command does not seems to work??
>
>
> Thanks
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:04 ART