From: Ron Lim (gottobeccie@gmail.com)
Date: Wed Mar 11 2009 - 07:37:39 ARST
Hi Dale,
You got a good point here. In fact, I would like to learn how to
configure the lightstream 1010 for sp lab. I knew it wasn't tested but
I would love to learn it. I did the same to learn configuration on
frame relay switch too.
Maybe silly but hope not to miss any part as to be an expert.
Thanks!
Regards,
Ron
On 3/11/09, Dale Shaw <dale.shaw@gmail.com> wrote:
> Hi Ron,
>
> I guess you'd already be aware of this, but dynamips can emulate an
> ATM switch. I realise it's not remotely the same as a real LightStream
> or cat8500, but it's better than nothing.
>
> This might be a stupid statement, but the LightStream/cat8500 isn't
> listed on the SP lab exam equipment list. If it's anything like the
> R&S lab's Frame Relay switch, which you can't configure anyway, you
> might not be missing out on much by not having the real switch.
>
> Maybe others could comment on how useful a real ATM switch would be
> for SP lab prep.
>
> ..or have I misunderstood your question -- are you just looking for a
> config to apply to a LightStream/cat8500, that you already have, to
> facilitate building a flexible lab topology?
>
> cheers,
> Dale
>
> On Wed, Mar 11, 2009 at 7:58 PM, Ron Lim <gottobeccie@gmail.com> wrote:
>> Dear Experts,
>>
>> I would like to know how could I configure LightStream 1010 for the
>> purpose
>> of Service Provder CCIE lab.
>>
>> I suppose vendor of the course provide would know what they did to allow
>> rack rental.
>>
>> Thanks!
>>
>> Regards,
>> Ron
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:04 ART