Re: C-RP group-list deny does not work ?

From: Scott M Vermillion (scott_ccie_list@it-ag.com)
Date: Sun Mar 08 2009 - 18:27:11 ARST

• Next message: JAZ: "Re: clear interface serial command"
• Previous message: Scott M Vermillion: "Re: vlan dot1q tag native ...."
• Maybe in reply to: naveen M S: "C-RP group-list deny does not work ?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

You have discovered a nasty little caveat in C-RP announcement
filtering Naveen. You can only use a series of permit statements in
this type of ACL. Deny statements, while accepted, are not effective.

Regards,

Scott

On Mar 7, 2009, at 9:34 , naveen M S wrote:

> Folks,
>
> Did someone try using "deny" in the "ip pim send-rp-announce .."
> command ?
>
> I wanted router R1 only be C-RP for *all groups except 239.0.0.0/8*,
> but the
> deny didn't work.
>
> Eg:
>
> ip pim send-rp-announce loopback0 scope 10 group-list 100
> !
> ip access-list standard 100
> deny 239.0.0.0 0.255.255.255
> permit any
>
> -Naveen.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net

• Next message: JAZ: "Re: clear interface serial command"
• Previous message: Scott M Vermillion: "Re: vlan dot1q tag native ...."
• Maybe in reply to: naveen M S: "C-RP group-list deny does not work ?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:04 ART