From: Modular (modulartx@gmail.com)
Date: Sun Mar 08 2009 - 05:18:10 ARST
While working some practice labs Ive run into some scenarios where the
proctor guides provide solutions where two MFR interfaces or two regular
multilink interfaces are set up on a router with the same IP address. How is
this possible??
R6
interface MFR1
no ip address
no keepalive
!
interface MFR1.69 point-to-point
ip address 150.100.69.6 255.255.255.0
frame-relay interface-dlci 690
!
interface MFR1.96 point-to-point
ip address 150.100.96.6 255.255.255.0
frame-relay interface-dlci 960
!
interface Serial0/2/0
no ip address
encapsulation frame-relay MFR1
clock rate 2000000
no arp frame-relay
!
interface Serial0/2/1
no ip address
encapsulation frame-relay MFR1
clock rate 2000000
no arp frame-relay
R9
interface MFR1
no ip address
no keepalive
!
interface MFR1.69 point-to-point
ip address 150.100.69.9 255.255.255.0
frame-relay interface-dlci 690
!
interface MFR1.96 point-to-point
ip address 150.100.96.9 255.255.255.0
frame-relay interface-dlci 960
!
interface Serial0/2/0
no ip address
encapsulation frame-relay MFR1
no arp frame-relay
!
interface Serial0/2/1
no ip address
encapsulation frame-relay MFR1
no arp frame-relay
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:04 ART