Re: Serial0/0 is up, line protocol is down

From: Sadiq Yakasai (sadiqtanko@gmail.com)
Date: Sat Mar 07 2009 - 09:16:26 ARST

Next message: Vijayaram V: "FRTS"
Previous message: Anees uddin: "Re: CCIE SP Basic Configuration - InternetworkExpert .net file"
Maybe in reply to: Xiaobo Zhu: "Serial0/0 is up, line protocol is down"
Next in thread: Xiaobo Zhu: "Re: Serial0/0 is up, line protocol is down"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Ca you add this to the dce interface and lets see what happens:

dce-terminal-timing-enable

Sadiq

On Sat, Mar 7, 2009 at 11:10 AM, Xiaobo Zhu <xiaobo@zhu.net> wrote:

> Sorry for the wrong subnet mask, but it still can't work proper after I
> configured it correctly.
>
> On Sat, Mar 7, 2009 at 6:27 PM, Xiaobo Zhu <xiaobo@zhu.net> wrote:
>
> > R1's s0/0 is connected to R2's s0/0 directly, and configured as follows,
> > will any one please figure out why the interface status is up but
> protocol
> > status is down?
> >
> > R1(config-if)#do sh contr s0/0
> > Interface Serial0/0
> > Hardware is PowerQUICC MPC860
> > DTE V.35 RX clock detected.
> >
> > R1(config-if)#do sh run int s0/0
> > Building configuration...
> > Current configuration : 73 bytes
> > !
> > interface Serial0/0
> > ip address 12.0.0.1 255.0.0.0
> > no fair-queue
> > end
> >
> > R2(config-if)#do sh contr s0/0
> > Interface Serial0/0
> > Hardware is PowerQUICC MPC860
> > DCE V.35, clock rate 64000
> > idb at 0x82C0C31C, driver data structure at 0x82C140F0
> > SCC Registers:
> >
> > R2(config-if)#do sh run int s0/0
> > Building configuration...
> > Current configuration : 95 bytes
> > !
> > interface Serial0/0
> > ip address 12.0.0.2 255.255.255.0
> > clock rate 64000
> > no fair-queue
> > end
> > R1#sh ip int b
> > Interface IP-Address OK? Method Status
> > Protocol
> > Ethernet0/0 unassigned YES NVRAM administratively
> down
> > down
> > Serial0/0 12.0.0.1 YES manual up
> > up
> > Ethernet0/1 unassigned YES NVRAM administratively
> down
> > down
> >
> > R2(config-if)#do sh ip int b
> > Interface IP-Address OK? Method Status
> > Protocol
> > Ethernet0/0 unassigned YES NVRAM administratively
> down
> > down
> > Serial0/0 12.0.0.2 YES manual up
> > down
> > Serial0/1 unassigned YES NVRAM administratively
> down
> > down
> >
> > --
> > Xiaobo Zhu
> >
>
>
>
> --
> Xiaobo Zhu
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- CCIE #19963

Blogs and organic groups at http://www.ccie.net

Next message: Vijayaram V: "FRTS"
Previous message: Anees uddin: "Re: CCIE SP Basic Configuration - InternetworkExpert .net file"
Maybe in reply to: Xiaobo Zhu: "Serial0/0 is up, line protocol is down"
Next in thread: Xiaobo Zhu: "Re: Serial0/0 is up, line protocol is down"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:04 ART