From: Anees uddin (uddin2@gmail.com)
Date: Sat Mar 07 2009 - 09:12:23 ARST
Your mapping on dynamips are probably not correct. Checkout the following
cool link to help you out:
http://pwp.netcabo.pt/amsoares/dynamips/dynamips.htm
Thanks
Anees
On Sat, Mar 7, 2009 at 2:37 AM, backbone systems <backbone.systems@gmail.com
> wrote:
> Try this,
>
> R1:
> > interface ATM3/0.1 point-to-point
> > ip address 150.1.19.1 255.255.255.0
> > pvc 0/102
>
>
>
> On Sat, Mar 7, 2009 at 11:07 AM, Vignesh Sethuraman
> <sethuvignesh@gmail.com> wrote:
> > Hello,
> >
> > I was configuring basic atm configuration between 2 routers connected via
> > ATM switch in my 4 GB Ram laptop running WindowsXP.
> >
> > R1(3/0) ------ 1/0 (ATM SW) 2/0 ------(3/0) R2
> >
> > I am unable to ping R1 to R2
> >
> > R1:
> > interface ATM3/0
> > ip address 150.1.19.1 255.255.255.0
> > no atm enable-ilmi-trap
> > no clns route-cache
> > pvc 0/102
> > protocol ip 150.1.19.2 broadcast
> >
> > R2:
> > interface ATM3/0
> > ip address 150.1.19.2 255.255.255.0
> > no atm enable-ilmi-trap
> > no clns route-cache
> > pvc 0/102
> > protocol ip 150.1.19.1 broadcast
> >
> > R1#p 150.1.19.2
> > Type escape sequence to abort.
> > Sending 5, 100-byte ICMP Echos to 150.1.19.2, timeout is 2 seconds:
> > .....
> > Success rate is 0 percent (0/5)
> > R1#
> > I have started my Cell mode atm switch. But i did not do any mappings on
> the
> > ATM switch. Do we need to configure mappings on the ATM switch as like
> the
> > FRSW. I am using InternetworkExpert .net file.
> >
> > And also CPU process is showing 100% even if i choose the best idlepc
> shown
> > in the GNS.
> >
> > Could you pleas help me to resolve this issue.
> >
> > Thanks,
> > Vignesh
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:04 ART