From: mohmmad imran (imran_mohmmad@yahoo.com)
Date: Tue Feb 24 2009 - 18:42:44 ARST
Hi,
I believe that default-information is not our option here because we are redistributing the static default route into eigrp and it will only going to affect Default-candidate behaviour:-
default-information in <ACL>- Erases the default candidate marker from all received routes not matched by the IP access list <ACL>
default-information out <ACL>- Erases the default candidate marker from all routes not matched by <ACL> when they are advertised to EIGRP neighbors.
no default-information in- Does not accept any default candidate markers.
no default-information out- Does not mark any routes as default candidates in outgoing updates. The router itself still uses the default candidate markers on the routes in the EIGRP topology database to select its own gateway of last resort.
since we are not allowed to use any-route-map/distribute-list, I dont see any other wayout to stop advertising default route from the originating router.
only thing we can do is manipulate the default route AD on neighbour router to 255, so it is doesn't get installed into the routing table, but to that we need to advertise it is an internal route with network statement 0.0.0.0, instead of redistribute statement because the distance command in EIGRP can not change the default for external routes.
--Imran
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of joe_astorino@comcast.net
Sent: Tuesday, February 24, 2009 1:26 PM
To: Edouard Zorrilla
Cc: ccielab@groupstudy.com; Robin.B; Narbik Kocharians
Subject: Re: Removing Default route propagation
Can you change the distance to 255 for just that route in the eigrp process using the distance command and an ACL ?
- Joe
----- Original Message -----
From: "Edouard Zorrilla" <ezorrilla@tsf.com.pe>
To: "Robin.B" <ro.betterley@gmail.com>, "Narbik Kocharians" <narbikk@gmail.com>
Cc: ccielab@groupstudy.com
Sent: Tuesday, February 24, 2009 1:29:26 PM GMT -05:00 US/Canada Eastern
Subject: Re: Removing Default route propagation
Anyone how to do what Robin is asking ?
Thanks a lot,
Regards
----- Original Message -----
From: "Robin.B" <ro.betterley@gmail.com>
To: "Narbik Kocharians" <narbikk@gmail.com>
Cc: <ccielab@groupstudy.com>
Sent: Tuesday, February 24, 2009 12:43 PM
Subject: RE: Removing Default route propagation
> Hi Sir,
>
> I see it as a DEX 0/0
>
> -----Original Message-----
> From: Narbik Kocharians <narbikk@gmail.com>
> Sent: ffd8 , 25 d: f, 2009 1:25 AM
> To: Robin.B <ro.betterley@gmail.com>
> Cc: ccielab@groupstudy.com
> Subject: Re: Removing Default route propagation
>
> How do you see the default route in your routing table? Do you see it as a
> candidate default, or just a 0.0.0.0?
>
> On Tue, Feb 24, 2009 at 9:09 AM, Robin.B <ro.betterley@gmail.com> wrote:
>
>> Hello GS,
>>
>> My EIGRP has a default route being propagated via redistributed static.
>> I
>> understand that this is the nature of EIGRP process.
>>
>> I need to deny this default route from being received by my neighbors. Do
>> not
>> use any form of route-map or distribute-list. Can someone explain how
>> should I
>> place the "no default information-originate" ? I have tested it but it
>> doesn't
>> seems to achieve the result.
>>
>> Thanks in advance.
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>
>
> [The entire original message is not included]
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:12 ARST