From: Mahmoud shaker (mashaker@gmail.com)
Date: Tue Feb 24 2009 - 10:52:45 ARST
Hello
i was making a lab and i got a problem and failed to solve it . the senario
R1,R2 and R5 (R 5 is the HUB) is in area 125 and is connected using PPPover
FR so
i use Virtual template between them and after i enable the OSPF to area 12
and 55 to link to backbone , i used 2 Virtual link R2---R5 R5---R1 as
the question says
(dont use tunnel ineterface)
the problem is the hub site know all the connection from one virtual-access
(behind are 12 and are 0 ) although R5 know the spoke from 2 differnet
virtual access
(150.1.2.2
area 12)
---------------
R2 FR |
Area 125 R5 | area 55
|
R1
--------------
area 0
===================================
From R5
C 128.1.125.0/24 is directly connected, Virtual-Access1
is directly connected, Virtual-Access2
C 128.1.125.1/32 is directly connected, Virtual-Access1
C 128.1.125.2/32 is directly connected, Virtual-Access2
O IA 192.10.1.0/24 [110/1002] via 128.1.125.2, 00:02:10, Virtual-Access1
O IA 150.1.3.3/32 [110/12] via 128.1.125.1, 00:02:10, Virtual-Access1
O IA 150.1.2.2/32 [110/2] via 128.1.125.2, 00:02:10, Virtual-Access1
O IA 150.1.1.1/32 [110/2] via 128.1.125.1, 00:02:10, Virtual-Access1
=======================================================
i solve this using tunnel interface not Virtual link but this is not the
required answer can any one tell me what i forget as i tried alot of things
like using 2 virtual-tempalte on the hub
change the ospf network type to point-to-point
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:12 ARST