From: ALL From_NJ (all.from.nj@gmail.com)
Date: Mon Feb 23 2009 - 14:13:39 ARST
Yep, that is my understanding too.
BTW - I can not find the reference, but for the lab portion, I thought it
was only frame mode. No more cell mode I thought ...
I checked the lab blueprint, but ... am not finding references to the
modes.
On Mon, Feb 23, 2009 at 11:09 AM, swm@emanon.com <swm@emanon.com> wrote:
> Cell mode MPLS is a heavier burden on interfacing with the ATM network in
> order to use it's built-in features and intracacies. Your ATM switch will
> need to be configured and capable for this to work.
>
> With Frame Mode, you are essentially "not caring" about the underlying
> technology (be it frame, sonet, atm, ethernet, ppp, whatever) as long as
> you
> have reachability and communications already established.
>
> HTH,
>
> Scott
>
>
> ---- Message from Service Provider <service.providersa@gmail.com> at
> 2009-02-23 17:39:14 ------
> >Hi guys
> >
> >I was just doing a lab and realised that when configuring MPLS cell-mode,
> no
> >IGP is necessary or required to establish the LDP neighborship like in
> >frame-mode MPLS. What causes this between cell-mode vs frame-mode?
> >
> >
> >Blogs and organic groups at http://www.ccie.net
> >
> >_______________________________________________________________________
> >Subscription information may be found at:
> >http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
-- Andrew Lee Lissitz all.from.nj@gmail.comBlogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:12 ARST