From: swm@emanon.com
Date: Mon Feb 23 2009 - 14:09:36 ARST
Cell mode MPLS is a heavier burden on interfacing with the ATM network in
order to use it's built-in features and intracacies. Your ATM switch will
need to be configured and capable for this to work.
With Frame Mode, you are essentially "not caring" about the underlying
technology (be it frame, sonet, atm, ethernet, ppp, whatever) as long as you
have reachability and communications already established.
HTH,
Scott
---- Message from Service Provider <service.providersa@gmail.com> at
2009-02-23 17:39:14 ------
>Hi guys
>
>I was just doing a lab and realised that when configuring MPLS cell-mode, no
>IGP is necessary or required to establish the LDP neighborship like in
>frame-mode MPLS. What causes this between cell-mode vs frame-mode?
>
>
>Blogs and organic groups at http://www.ccie.net
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:12 ARST