Re: Packet processing sequence?

From: ALL From_NJ (all.from.nj@gmail.com)
Date: Sun Feb 22 2009 - 13:20:24 ARST

Hey Dave(2),

I hope all is well.

Found this:
https://cisco.hosted.jivesoftware.com/message/10485

Scroll down to read Scott's and Marko's comments. Similar discussion points
towards the end ...

HTH,

Andrew

On Sun, Feb 22, 2009 at 8:59 AM, dave dave <funccie@gmail.com> wrote:

> Hi Expert,
>
> (S)192.168.1.10 --R1-------GRE Tunnel----------R10---- 10.1.1.10 (D) port
> 23
>
> If R1 receive the packet with Source 192.168.1.1 to the destination
> 10.1.1.10, if i am doing the some QoS like setting some ip precedence value
> to this packet & through GRE tunnel sending to the destination (R10) ip
> 10.1.1.10 port 23.
>
> How the packet will be treated in terms of sequence.....
>
> Steps:
> 1. QoS
> 2. Encapsulate the packet for tunneling
> 3. Routing ..is it correct? please give your expert views :-
>
> Regards
> Dave
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
> 

-- 
Andrew Lee Lissitz
all.from.nj@gmail.com

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:12 ARST