Re: Wireless config help

From: Derek Pocoroba (dpocoroba@gmail.com)
Date: Thu Feb 19 2009 - 16:09:30 ARST

If you do decide to convert the AP's to LWAP the Cisco conversion tool will
help in this.
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161111

I have used it in the past with few problems.

Good luck

On Wed, Feb 18, 2009 at 12:57 PM, Sharma, Praveen <
Praveen.Sharma@spansion.com> wrote:

> Hi GS,
>
> Need help in wireless configuration, I have 400 AP in my campus LAN, all
> are autonomous, no controller.
>
> Right now they are having only one ssid configured in them, but we are
> deploying one more ssid.
>
> Procedure which I found in Cisco web site is to configure sub-interfaces
> and assigning each ssid to sub-interface.
>
> Question is there any way I can do this without using sub interface or
> upgrade them over the LAN or bottom line is I don't want to remove 400
> AP from wall and connect console to them and reconfigure them.
>
> Thanks
> Praveen
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
> 

-- 
Derek Pocoroba
CCIE #18559

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:12 ARST