From: Martin Dean (mdean@diatac.com)
Date: Thu Feb 19 2009 - 13:53:19 ARST
400 APs WOW. One assumes these have been around awhile. Do you have a
WLSE - it will make things a lot easier?
It will be costly and time consuming converting them all to LW APs, if they
can be converted.
You can have multiple SSIDs. The problem you will run into security and IP
addressing.
If you want the same security and subnets on all SSIDs, no problem just add
them on each AP, can be done by cut and paste, or script. CiscoWorks could
probably handle this for you.
If you want different subnets or security, or both they VLANs are needed
with the appropriate Router config. Again this can be done by cut and paste,
or script. Plenty of info on the Cisco Web site for that.
----- Original Message -----
From: "Sharma, Praveen" <Praveen.Sharma@spansion.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, February 18, 2009 8:57 PM
Subject: Wireless config help
> Hi GS,
>
> Need help in wireless configuration, I have 400 AP in my campus LAN, all
> are autonomous, no controller.
>
> Right now they are having only one ssid configured in them, but we are
> deploying one more ssid.
>
> Procedure which I found in Cisco web site is to configure sub-interfaces
> and assigning each ssid to sub-interface.
>
> Question is there any way I can do this without using sub interface or
> upgrade them over the LAN or bottom line is I don't want to remove 400
> AP from wall and connect console to them and reconfigure them.
>
> Thanks
> Praveen
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.552 / Virus Database: 270.10.25/1958 - Release Date:
18/02/2009 08:57
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:12 ARST