From: Jason Madsen (madsen.jason@gmail.com)
Date: Tue Feb 17 2009 - 03:24:03 ARST
You can use the network command for any routes / addresses that show up in
your routing table.
Jason
On Mon, Feb 16, 2009 at 10:19 PM, Modular <modulartx@gmail.com> wrote:
> I'm working on a practice lab that tells you to configure the following
> static routes on a router:
>
>
> ip route 10.7.1.0 255.255.255.0 null0
> ip route 10.7.2.0 255.255.255.0 null0
>
> It then tells you to advertise these networks via EIGRP.
> Now, my instinct was to use "redistribute static", but the
> proctor guide uses:
>
> router eigrp 1
> network 10.7.1.0 0.0.0.255
> network 10.7.2.0 0.0.0.255
>
>
> How is this possible??? I thought that you could only
> use the network command with directly connected
> interfaces? Is there some exception when you have
> a static route pointing to an interface?
>
> Thanks,
> Mod
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:11 ARST