Re: EIGRP network cmd w/ static routes...

From: Dale Shaw (dale.shaw@gmail.com)
Date: Tue Feb 17 2009 - 03:35:04 ARST

Next message: Thameem Maranveetil Parambath: "Re: EIGRP network cmd w/ static routes..."
Previous message: John Edom: "Re: CCIE Voice Lab in Dubai"
Maybe in reply to: Modular: "EIGRP network cmd w/ static routes..."
Next in thread: Thameem Maranveetil Parambath: "Re: EIGRP network cmd w/ static routes..."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

On Tue, Feb 17, 2009 at 4:19 PM, Modular <modulartx@gmail.com> wrote:
> How is this possible??? I thought that you could only
> use the network command with directly connected
> interfaces?

You just answered your own question.

R1(config)#ip route 10.7.1.0 255.255.255.0 null0
R1#sh ip ro 10.7.1.0
Routing entry for 10.7.1.0/24
  Known via "static", distance 1, metric 0 (connected)
  Routing Descriptor Blocks:
  * directly connected, via Null0 <---- **** SEE THIS? ****
      Route metric is 0, traffic share count is 1

Blogs and organic groups at http://www.ccie.net

Next message: Thameem Maranveetil Parambath: "Re: EIGRP network cmd w/ static routes..."
Previous message: John Edom: "Re: CCIE Voice Lab in Dubai"
Maybe in reply to: Modular: "EIGRP network cmd w/ static routes..."
Next in thread: Thameem Maranveetil Parambath: "Re: EIGRP network cmd w/ static routes..."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:11 ARST