From: Andy Hogard (andyhogard@gmail.com)
Date: Tue Feb 10 2009 - 17:27:04 ARST
*Roger, check this ..*
*Verification on R2 for OSPFv3* *and ping/trace to R3 from R4 through v6
tunnel between R1&R2*
R2#
R2#sh ipv route ospf
IPv6 Routing Table - 7 entries
Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP
U - Per-user Static route
I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary
O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
O 13::/64 [110/11175]
via FE80::AC10:6501, Tunnel12
R2#
R2#
R2#sh ipv ospf neighbor
Neighbor ID Pri State Dead Time Interface ID Interface
172.16.24.4 1 FULL/DR 00:00:31 8 Serial1/0
1.1.1.1 1 FULL/ - 00:00:35 16 Tunnel12
R2#
R4#
R4#trace 13::13:3
Type escape sequence to abort.
Tracing the route to 13::13:3
1 24::24:2 124 msec 92 msec 36 msec
2 12::12:1 184 msec 56 msec 80 msec
3 13::13:3 76 msec 68 msec 72 msec
R4#
R4#ping 13::13:3
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 13::13:3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 44/138/236 ms
R4#
*Sweet ..muhahah! :D
HTH,
Andy.
*
On Tue, Feb 10, 2009 at 9:09 PM, Roger RPF <rpf@bluemail.ch> wrote:
> I just tried it yesterday, could not bring it up and running...but maybe I
> missed something...smile...
>
> regards
>
> Roger
>
> -----Urspr|ngliche Nachricht-----
> Von: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Im Auftrag von
> Alexei Monastyrnyi
> Gesendet: Dienstag, 10. Februar 2009 15:32
> An: S Malik
> Cc: Cisco certification
> Betreff: Re: IPV6: OSPF Routing over 6to4 Tunnel
>
> To my experience OSPF won't work over 6to4 tunnels. This is due to
> hellos and updates exchange between link-local addresses which one
> cannot properly map within 6to4 scheme.(true for RIPng and EIGRP as
> well). BGP seems to work though due to TCP nature, but I haven't tried
> myself. :-)
>
> Simple static route
> ipv6 route 2002::/16 Tunnel NNN
> would be a remedy but one has to follow 6to4 rules strictly for IPv^
> address assignments. It was a good post about it way back in Dec 08 or
> Jan 09.
>
> HTH,
> A.
>
> S Malik wrote:
> > Can we do ospfv3 routing over 6to4 tunnel?
> >
> > I would appreciate if some one can forward working configuration please.
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
-- My Blog URL: http://ccieno.blogspot.com/Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:10 ARST