Re: L2protocol tunnel/dot1q tunnel

From: ALL From_NJ (all.from.nj@gmail.com)
Date: Mon Feb 09 2009 - 01:55:02 ARST

Some how I sent before I was ready ... sorry about that.

On SW1 and SW2, when you do a sho cdp nei, you will not see SW3 and SW4
respectively.

What are you trying to configure?

On Sun, Feb 8, 2009 at 10:50 PM, ALL From_NJ <all.from.nj@gmail.com> wrote:

> Hey Team,
>
> This is actually a fun lab to do ... Topology:
>
> SW1 - <--> SW3 - <--> SW4 - <--> SW2
>
> LAb: --) Use Dot1Q tunneling, to make switch 3 and 4 disappear. ;-)
>
> The config guide (watch the ugly word wrap):
>
> http://cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/configuration/guide/swtunnel.html
>
> When you enable dot1q tunneling, the port will be in access mode.
>
>
>
>
>
> On Sun, Feb 8, 2009 at 1:06 PM, Hobbs <deadheadblues@gmail.com> wrote:
>
>> Sounds like you need to tunnel PAGP if you want an etherchannel to
>> form. Can you post the relevant parts of your configs?
>>
>> On Sun, Feb 8, 2009 at 5:25 AM, karim jamali <karim.jamali@gmail.com>
>> wrote:
>> > Hi experts,
>> >
>> > I need to know the difference between enabling l2protocol tunnel with
>> the
>> > port set to access mode and l2protocol tunnel with the port set to
>> > dot1q-tunnel mode?
>> >
>> > Has anyone encountered an etherchannel channel problem stating: cannot
>> > bundle PAGP not enabled on the remote port.
>> >
>> > Regards,
>> >
>> > --
>> > KJ
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> Andrew Lee Lissitz
> all.from.nj@gmail.com
> 

-- 
Andrew Lee Lissitz
all.from.nj@gmail.com

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:10 ARST