Re: PROBLEM WITH ETHERCHANNEL

From: karim jamali (karim.jamali@gmail.com)
Date: Sun Feb 08 2009 - 12:10:09 ARST

It is not needed since the no switchport command is already assigned on the
member interfaces.
The portchannel is layer 3.

On Sun, Feb 8, 2009 at 5:02 PM, NET HE <he_net@hotmail.com> wrote:

> Do you have cmd "no switchport" under the "int port34" ?
>
> Best Regards,
> Net (Xin) He
>
>
>
>
> > Date: Sun, 8 Feb 2009 10:07:19 +0300
> > Subject: PROBLEM WITH ETHERCHANNEL
> > From: karim.jamali@gmail.com
> > To: ccielab@groupstudy.com
>
> >
> > Dear Experts,
> >
> > Scenario 4 switches: SW1,SW2,SW3, & SW4. Layer 3 Etherchannel is to be
> > formed between SW4 (16&18) and SW3(13-14).
> >
> > SW4(16-18) CONNECTED TO SW2 (FA0/19,FA0/21)
> > SW3(13-14) CONNECTED TO SW1 (FA0/16,FA0/17)
> >
> > Dot1q tunneling has been configured between the two switches (SW2 AND
> SW1).
> > Configuration is as follows:
> >
> > SW4
> > conf t
> > int range fa0/16,fa0/18
> > no switchport
> > sh
> > channel-group 34 mode desirable
> >
> > int port34
> > ip add 156.18.109.10 255.255.255.0
> > int range fa0/16,fa0/18
> > no sh
> >
> > SW3
> > conf t
> >
> > int range fa0/13-14
> > no switchport
> > sh
> > channel-group 34 mode desirable
> >
> > int port34
> > ip add 156.18.109.9 255.255.255.0
> >
> > int range fa0/13-14
> > no sh
> >
> > SW1
> > conf t
> > int fa0/16
> > switchport mode dot1q-tunnel
> > l2protocol-tunnel point-to-point pagp
> > switchport access vlan 100
> > no sh
> >
> > int fa0/17
> > switchport mode dot1q-tunnel
> > l2protocol-tunnel point-to-point pagp
> > switchport access vlan 200
> > no sh
> >
> > SW2
> > conf t
> > int fa0/19
> > switchport mode dot1q-tunnel
> > l2protocol-tunnel point-to-point pagp
> > switchport access vlan 100
> > no sh
> >
> > int fa0/21
> > switchport mode dot1q-tunnel
> > l2protocol-tunnel point-to-point pagp
> > switchport access vlan 200
> > no sh
> >
> >
> > I am getting the error message: CANNOT BUNDLE ETHERCHANNEL NOT ENABLED ON
> > THE REMOTE DEVICE.
> >
> > I have no clue what could be causing this.
> >
> > --
> > KJ
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
>
> ------------------------------
> So many new options, so little time. Windows Live Messenger.<http://www.microsoft.com/windows/windowslive/messenger.aspx>
> 

-- 
KJ

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:10 ARST