From: Ravi Singh (way2ccie@googlemail.com)
Date: Fri Feb 06 2009 - 05:16:28 ARST
As Tony said "exec-timeout 0 0" or "no exec-timeout" is the solution and for
me this is one of the commands that I configure the first thing on a rack
along with a few aliases, "no ip domain lookup " etc.
Regards,
Ravi
On Fri, Feb 6, 2009 at 5:27 AM, mahmoud genidy <ccie.mahmoud@gmail.com>wrote:
> Hi GS
>
> I'm using CRT and I have to manually set the options to send (space
> charachter every ten minutes for example) to overcome the session idle
> timeout. Doing this in the lab will consume at least five minutes to
> customize CRT. Any other solution?
>
> I'm not sure if session time-out & absolute time-out line commands are the
> solution for this kind of issue.
>
> Any body can help?
>
> Thanks,
> M Genidy
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:10 ARST