From: Andy Hogard (andyhogard@gmail.com)
Date: Tue Feb 03 2009 - 09:04:32 ARST
If this is what you are doing,
sw(config)# interface vlan 10
no shutdown
Then you changing vlan 10 to be the native vlan on that switch, ideally a
2950.. simple! Other than that I echo with rsharma's answer ..the feature or
commands work, because they support the NM-16ESw, module. Which can you give
you the capabilities of working with an SVI, hence the "no shut" under and
vlan interface.
HTH,
Andy.
On Tue, Feb 3, 2009 at 8:28 AM, Raghav Bhargava
<raghavbhargava12@gmail.com>wrote:
> Hi Experts,
>
> What exactly does this command does on a cisco 2600.
>
> r6(config)#no shutdown ?
> vlan Shutdown VLAN switching
>
> Does it mean that Cisco 2600 has Vlan Switching capabilities...Just
> curious to know.. I know its not related to the lab but I was doing a
> no shut on one of my interface so came across..
>
>
> --
> Warm Regards
> Raghav
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
-- My Blog URL: http://ccieno.blogspot.com/Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:09 ARST