From: ALL From_NJ (all.from.nj@gmail.com)
Date: Tue Feb 03 2009 - 01:31:48 ARST
Not alot on this from the config guides ... (watch for the ugly word wrap)
http://www.cisco.com/en/US/docs/ios/lanswitch/command/reference/lsw_s2.html#wp1014302
From the guide:
shutdown vlan: To shut down local traffic on a specified VLAN, use the
shutdown vlan command in global configuration mode. To restart local traffic
on the VLAN, use the no form of this command.
shutdown vlan vlan-id
no shutdown vlan vlan-id
VLAN number of the VLAN to be locally shut down; valid values are from 2 to
1001.
Router(config)# shutdown vlan 2
Router(config)#
Sorry this does not help much. Thinking of a quick lab ... -
1) configure inter-vlan routing for VLANs 1, and 2. Ping across from a
switch or another device. Shutdown vlan 2 and see if you can still ping.
There might be a helpful debug command to assist with this as well ...
I do not have access to my gear presently ... but can lab this up tomorrow
if you like.
HTH,
Andrew Lee Lissitz
On Mon, Feb 2, 2009 at 9:58 PM, Raghav Bhargava
<raghavbhargava12@gmail.com>wrote:
> Hi Experts,
>
> What exactly does this command does on a cisco 2600.
>
> r6(config)#no shutdown ?
> vlan Shutdown VLAN switching
>
> Does it mean that Cisco 2600 has Vlan Switching capabilities...Just
> curious to know.. I know its not related to the lab but I was doing a
> no shut on one of my interface so came across..
>
>
> --
> Warm Regards
> Raghav
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
-- Andrew Lee Lissitz all.from.nj@gmail.comBlogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:09 ARST