From: Jared Scrivener (jscrivener@ipexpert.com)
Date: Wed Jan 28 2009 - 14:35:44 ARST
Hey Envuladu,
Yep, presuming that your source is external to the interface (and you aren't
pinging from the interface fa0/0 on R1 itself) then the traffic is inbound
on Fa0/0 on R1.
As such "ip multicast rate-limit in" would meet your needs.
Cheers,
Jared Scrivener CCIE3 #16983 (R&S, Security, SP), CISSP
Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Mailto: jscrivener@ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ENVULADU TSAKU
Sent: Wednesday, 28 January 2009 7:01 AM
To: Cisco certification
Subject: ip multicast rate-limit command
Hi all,
I am a little confused with the directions on this command.The DocCD says it
is used to
*To control the rate a sender from the source list can send to a multicast
group in the group list, use the ip multicast rate-limit command in
interface configuration mode
*This means if i have a scenario
source-----fa0/0 R1 fa0/1 -------------------fa0/1 R2
fa0/1-------------Group-members.
if i am to limit bandwidth on R1 fa0/0 to the multicast group members,will
it be IP MULTICAST RATE-LIMIT IN OR IP MULTICAST RATE_LIMIT OUT ?
i feel its in.
Thanks
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:40 ARST