From: Nick (ccieaz@googlemail.com)
Date: Tue Jan 27 2009 - 13:56:38 ARST
might be worth trying a ACL with no with wildcard. It works for me doing
this:
Rack1R4(config)#access-list 1 permit 1.1.1.0
Rack1R4#show access-lists
Standard IP access list 1
10 permit 1.1.1.0
2009/1/27 GAURAV MADAN <gauravmadan1177@gmail.com>
> Hi
>
> I tried that also before sending the mail .. but with no success
>
> Gaurav Madan
>
> On Tue, Jan 27, 2009 at 9:01 PM, Marijo Bernardic <
> MBernardic@relianceglobalcom.com> wrote:
>
> > Hi Gaurav,
> >
> > Can you try to use R3 Router-ID 150.1.3.3 in your distance command
> > instead of using 142.1.0.3.
> >
> > Regards
> >
> > Marijo Bernardic
> > CCIE #23245
> >
> >
> > -----Urspr|ngliche Nachricht-----
> > Von: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Im Auftrag von
> > GAURAV MADAN
> > Gesendet: Dienstag, 27. Januar 2009 16:08
> > An: Cisco certification
> > Betreff: distance cli in ospf not working ?
> >
> > Hi group
> >
> > I have following topo :
> >
> > R5
> > / \
> > / \
> > / \
> > / \
> > R3 ---------- R4
> >
> > The ethernet netw 142.1.34.0/24 betwwen R3 and R4 is learnt on R5 via R3
> > as
> > well as R4 ( R3,R4,R5 is hub and spoke FR .. all using physical
> interfaces
> > )
> > .
> > I want to learn via R4 only . Not via R3
> >
> > Prior to config :
> >
> > Rack1R5(config)#do sh ip route os
> > 142.1.0.0/16 is variably subnetted, 7 subnets, 2 masks
> > O 142.1.0.4/32 [110/64] via 142.1.0.4, 00:00:52, Serial0/0/0
> > O 142.1.0.3/32 [110/64] via 142.1.0.3, 00:00:52, Serial0/0/0
> > O 142.1.34.0/24 [110/65] via 142.1.0.4, 00:00:52, Serial0/0/0
> > <<<<<<<<<
> > [110/65] via 142.1.0.3, 00:00:52,
> > Serial0/0/0 <<<<<<<<<
> > O 142.1.89.0/24 [110/2] via 142.1.58.8, 00:00:52, FastEthernet0/1
> > 150.1.0.0/16 is variably subnetted, 3 subnets, 2 masks
> > O 150.1.4.4/32 [110/65] via 142.1.0.4, 00:00:52, Serial0/0/0
> > O 150.1.3.3/32 [110/65] via 142.1.0.3, 00:00:52, Serial0/0/0
> >
> >
> > Now I configure
> >
> > Rack1R5(config)#do sh ip access-li
> > Standard IP access list 1
> > 10 permit 142.1.34.0, wildcard bits 0.0.0.255 log
> >
> >
> > outer ospf 10
> > router-id 150.1.5.5
> > log-adjacency-changes
> > network 142.1.0.5 0.0.0.0 area 345
> > network 142.1.5.5 0.0.0.0 area 5
> > network 142.1.58.5 0.0.0.0 area 0
> > network 150.1.5.5 0.0.0.0 area 345
> > distance 255 142.1.0.3 0.0.0.0 1 <<<<<<<<<
> > !
> >
> > But I still see route learnt via both the neighbors .
> > Can someone point out to problem
> >
> >
> > Just FYI : R3 R4 R5 share common area .. I know of "distance" and
> > "distribute list" as tool to do intra-area filtering . Havent dist list
> ..
> > just want to know why my sol didnt worked
> >
> > Thnx
> > Gaurav Madan.
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
> > ______________________________________________________________________
> > This email has been scanned by the MessageLabs Email Security System.
> > For more information please visit http://www.messagelabs.com/email
> > ______________________________________________________________________
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
-- ---Nick
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:40 ARST