From: GAURAV MADAN (gauravmadan1177@gmail.com)
Date: Tue Jan 27 2009 - 13:44:18 ARST
Hi
I tried that also before sending the mail .. but with no success
Gaurav Madan
On Tue, Jan 27, 2009 at 9:01 PM, Marijo Bernardic <
MBernardic@relianceglobalcom.com> wrote:
> Hi Gaurav,
>
> Can you try to use R3 Router-ID 150.1.3.3 in your distance command
> instead of using 142.1.0.3.
>
> Regards
>
> Marijo Bernardic
> CCIE #23245
>
>
> -----Urspr|ngliche Nachricht-----
> Von: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Im Auftrag von
> GAURAV MADAN
> Gesendet: Dienstag, 27. Januar 2009 16:08
> An: Cisco certification
> Betreff: distance cli in ospf not working ?
>
> Hi group
>
> I have following topo :
>
> R5
> / \
> / \
> / \
> / \
> R3 ---------- R4
>
> The ethernet netw 142.1.34.0/24 betwwen R3 and R4 is learnt on R5 via R3
> as
> well as R4 ( R3,R4,R5 is hub and spoke FR .. all using physical interfaces
> )
> .
> I want to learn via R4 only . Not via R3
>
> Prior to config :
>
> Rack1R5(config)#do sh ip route os
> 142.1.0.0/16 is variably subnetted, 7 subnets, 2 masks
> O 142.1.0.4/32 [110/64] via 142.1.0.4, 00:00:52, Serial0/0/0
> O 142.1.0.3/32 [110/64] via 142.1.0.3, 00:00:52, Serial0/0/0
> O 142.1.34.0/24 [110/65] via 142.1.0.4, 00:00:52, Serial0/0/0
> <<<<<<<<<
> [110/65] via 142.1.0.3, 00:00:52,
> Serial0/0/0 <<<<<<<<<
> O 142.1.89.0/24 [110/2] via 142.1.58.8, 00:00:52, FastEthernet0/1
> 150.1.0.0/16 is variably subnetted, 3 subnets, 2 masks
> O 150.1.4.4/32 [110/65] via 142.1.0.4, 00:00:52, Serial0/0/0
> O 150.1.3.3/32 [110/65] via 142.1.0.3, 00:00:52, Serial0/0/0
>
>
> Now I configure
>
> Rack1R5(config)#do sh ip access-li
> Standard IP access list 1
> 10 permit 142.1.34.0, wildcard bits 0.0.0.255 log
>
>
> outer ospf 10
> router-id 150.1.5.5
> log-adjacency-changes
> network 142.1.0.5 0.0.0.0 area 345
> network 142.1.5.5 0.0.0.0 area 5
> network 142.1.58.5 0.0.0.0 area 0
> network 150.1.5.5 0.0.0.0 area 345
> distance 255 142.1.0.3 0.0.0.0 1 <<<<<<<<<
> !
>
> But I still see route learnt via both the neighbors .
> Can someone point out to problem
>
>
> Just FYI : R3 R4 R5 share common area .. I know of "distance" and
> "distribute list" as tool to do intra-area filtering . Havent dist list ..
> just want to know why my sol didnt worked
>
> Thnx
> Gaurav Madan.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please visit http://www.messagelabs.com/email
> ______________________________________________________________________
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:40 ARST