From: sushil menon (sushilmenon2001@gmail.com)
Date: Tue Jan 27 2009 - 10:11:48 ARST
Hi mate thanks but do u think it would be required for downloadable acls i
doubt it. cause i think when we are using downloadable acls we are not using
the Cisco VSA attributes.,
regards
sushil
On Tue, Jan 27, 2009 at 4:03 PM, Edouard Zorrilla <ezorrilla@tsf.com.pe>wrote:
> Yes Sir,
>
> You need it. It is inside the Cisco Doc. Yust take a look at this:
>
>
> http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.2_25_see/configuration/guide/swauthen.html#wpxref83693
>
> Regards
>
>
> ----- Original Message -----
> *From:* sushil menon <sushilmenon2001@gmail.com>
> *To:* Edouard Zorrilla <ezorrilla@tsf.com.pe>
> *Cc:* Sadiq Yakasai <sadiqtanko@gmail.com> ; security@groupstudy.com ;
> ccielab@groupstudy.com
> *Sent:* Tuesday, January 27, 2009 6:55 AM
> *Subject:* Re: 802.1x with ACL
>
> Hi all i have used ip acl with dot.1x before on 3550 switches but i don;t
> remember ever required to using the command mentioned by tyson.
>
> i have tried it with downloadable acls. but i am not sure with cisco
> av-pairs. tyson can u please confirm on the same.
>
> regards
>
> sushil
>
> On Tue, Jan 27, 2009 at 3:22 PM, Edouard Zorrilla <ezorrilla@tsf.com.pe>wrote:
>
>> Sadiq,
>>
>> Why do I need to enable "ip device traking",
>>
>> Regards
>>
>> ----- Original Message -----
>> From: Sadiq Yakasai
>> To: Edouard Zorrilla
>> Cc: security@groupstudy.com ; ccielab@groupstudy.com
>> Sent: Monday, January 26, 2009 6:44 PM
>> Subject: Re: 802.1x with ACL
>>
>>
>> Dont forget to glabally enable IP device tracking globally on the
>> switch
>> with the command <ip device tracking>.
>>
>> Sadiq
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:40 ARST