From: Edouard Zorrilla (ezorrilla@tsf.com.pe)
Date: Tue Jan 27 2009 - 10:03:43 ARST
Yes Sir,
You need it. It is inside the Cisco Doc. Yust take a look at this:
http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12
.2_25_see/configuration/guide/swauthen.html#wpxref83693
Regards
----- Original Message -----
From: sushil menon
To: Edouard Zorrilla
Cc: Sadiq Yakasai ; security@groupstudy.com ; ccielab@groupstudy.com
Sent: Tuesday, January 27, 2009 6:55 AM
Subject: Re: 802.1x with ACL
Hi all i have used ip acl with dot.1x before on 3550 switches but i don;t
remember ever required to using the command mentioned by tyson.
i have tried it with downloadable acls. but i am not sure with cisco
av-pairs. tyson can u please confirm on the same.
regards
sushil
On Tue, Jan 27, 2009 at 3:22 PM, Edouard Zorrilla <ezorrilla@tsf.com.pe>
wrote:
Sadiq,
Why do I need to enable "ip device traking",
Regards
----- Original Message -----
From: Sadiq Yakasai
To: Edouard Zorrilla
Cc: security@groupstudy.com ; ccielab@groupstudy.com
Sent: Monday, January 26, 2009 6:44 PM
Subject: Re: 802.1x with ACL
Dont forget to glabally enable IP device tracking globally on the switch
with the command <ip device tracking>.
Sadiq
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:40 ARST